Quick3DCloset®'s REQUIREMENTS

Operating System

Quick3DCloset® requires Windows® 10 (*previous Windows® versions are not supported).  Quick3DCloset® needs a 64-bit operating system.


Hardware

The recommended hardware requirements for Quick3DCloset® are the following: CPU Intel i5 or i7, 1GB RAM or more, 100MB free disk space for installation, mouse with 2 buttons + wheel, graphics card with at least 256MB of memory (not shared) and 1024x786 pixels display resolution with true color or more.


Internet connection

Quick3DCloset® requires permanent connection to the Internet on the computer you are using.


Graphic Printers

Quick3DCloset® can use all the printers installed and configured in Windows. The most popular printers are inkjet printers. For best printing results we recommend that you use high-quality paper.


Using the mouse

Use the mouse to select commands, entities in the drawing, and drawing points. Use the keyboard to enter numbers and text.

Quick3DCloset® requires a mouse with at least two buttons. A mouse with three buttons will enable you to pan the drawing on the screen. In addition, if the third button is a wheel, you can use it to zoom in and out of the design.

Make sure that the three buttons work correctly. If they don't, reinstall the mouse drivers in your system, or contact your computer's dealer or technical support.


LEFT BUTTON:

Selection: Use it to select the menu options, icons, dialog boxes, and command parameters.

Double clicking on any object: Use it to directly edit the selected object.

RIGHT BUTTON:

Rotate view 3D: Clicking and holding this button you can rotate the view. This option is available in 3D mode only.

If you are not using any other function, when you right-click, a text menu will open.






  • If nothing has been selected the following menu will open:



  • If an object has been selected, a text menu for that object will open. By right-clicking on any element of the design (furniture, appliances, accessories or closets), the following menu appears:

ACCESORIES

CLOSETS

Available options:

Available options:


CENTER BUTTON/WHEEL:

Pan: Clicking and holding the central button/wheel pans the drawing to center it on the screen.

Zoom: Scroll up/down the wheel to zoom in/out.

KEYBOARD:

Repeat the last command: Press the spacebar to repeat the last command without having to click on its icon.

Ctrl + Z: Clicking on the "Control + Z" keys will undo the last modification (NOTE: Not every action can be undone).